What everyone is doing at Kirumi and Teruteru's wedding! Idea inspired by u/floforesslz

2022.01.26 06:13 sayanabanana What everyone is doing at Kirumi and Teruteru's wedding! Idea inspired by u/floforesslz

submitted by sayanabanana to danganronpa [link] [comments]


2022.01.26 06:13 ModeratorForLeaks Expecting a response in ...

Expecting a response in ... submitted by ModeratorForLeaks to WhitePeopleTwitter [link] [comments]


2022.01.26 06:13 xMarinx Can BTC reach 100k EOY?

Lets start with this question early this year, do you honestly believe it can reach 100k before 2023? We all saw the insane hype last year when it was showing no signs of stopping. Of course, it got to 68k and now we are down ~50%.
We could see higher highs if we dont drop much lower because that would mean we have a higher low than we had in May when the market went down a lot.
We have a lot of time to recover before this year ends and to shoot for the stars. I like to stay positive and believe that we can get to 100k, if not 100k, at least 85-90k. Bit of hopium.
submitted by xMarinx to CryptoCurrency [link] [comments]


2022.01.26 06:13 AwkwardGamerRNx These loaded nachos I made. Not a naked chip in sight. I regret nothing.

These loaded nachos I made. Not a naked chip in sight. I regret nothing. submitted by AwkwardGamerRNx to drunkencookery [link] [comments]


2022.01.26 06:13 frequency_abovetime Help with DFPlayer project non blocking

I am working on a project that should do the following:
A - while two persons are holding hands the DFPlayer will play an audio file.
B - when the two person stops holding hands the DFPlayer will pause.
C- When holding again the DFPlayer will resume.
D - If the two persons are holding their hands more than one minute - the audio file will play until the end regardless if the two persons are still holding or not.
in order to decide if the persons are holding hands I'm using two piece of wire between A0 and ground. A0 is pull up to +5V.
when the two person are holding one wire that is connected to A0 and the other that is connected to ground, the moment they holds their two others hands together they will close the circuit and the value at A0 will fall below a certain threshold that indicates hands holding.
I have the following code:

#include "Arduino.h" #include "SoftwareSerial.h" #include "DFRobotDFPlayerMini.h" SoftwareSerial mySoftwareSerial(10, 11); // RX, TX DFRobotDFPlayerMini player; //input pin// int pin_touch = A0; //reading from input pin// uint16_t reading; uint16_t lastreading; unsigned long previousMillis = 0; const uint16_t interval = 100; const uint16_t threshold = 500; enum DeviceState {INITIALISING, HOLD, RELEASE}; DeviceState deviceState = DeviceState::INITIALISING; void setup() { mySoftwareSerial.begin(9600); Serial.begin(115200); Serial.println(); if (!player.begin(mySoftwareSerial)) { //Use softwareSerial to communicate with mp3. Serial.println(F("Unable to begin:")); Serial.println(F("1.Please recheck the connection!")); Serial.println(F("2.Please insert the SD card!")); while(true); } Serial.println(F("DFPlayer Mini online.")); player.setTimeOut(500); //Set serial communictaion time out 500ms //----Set volume---- player.volume(20); //Set volume value (0~30). lastreading = reading; deviceState = DeviceState::HOLD; for(int i = 0; i < 20; i++) { analogRead(pin_touch); delay(50); } } void loop() { //printing the value from A0 in intervals// uint16_t reading = analogRead(pin_touch); if(millis() - previousMillis >= interval) { previousMillis = millis(); reading = analogRead(pin_touch); if(lastreading != reading) { Serial.print("Reading: "); Serial.println(reading); lastreading = reading; } } switch (deviceState) { case DeviceState::INITIALISING: break; case DeviceState::HOLD: //holding hands// if(reading < threshold) { player.start(); deviceState = DeviceState::RELEASE; } break; case DeviceState::RELEASE: //not holding hands// if(reading > threshold) { player.pause(); deviceState = DeviceState::HOLD; } break; } } 
the above code working fine for the following:
It start and play the audio file while holding hands.
It pause the audio file when no hands are held.
Two things I would like to solve with no success:
1) when the hands are release there is a state of bouncing so the audio is pause start and pause again creating noise. A solution I think of: when detecting hand release - first fade volume to 0 and only then pause the audio file.
2) I can't make point D from the top of the post.
Any help with those two?
Thanks!
submitted by frequency_abovetime to arduino [link] [comments]


2022.01.26 06:13 SirLadthe1st Zakaz aborcji znowu zabił.

Zakaz aborcji znowu zabił. submitted by SirLadthe1st to Polska [link] [comments]


2022.01.26 06:13 The_Jinx_Effect Pixel 6 wireless charging misbehaving -

I'm having some issues with the Pixel 6 wireless charging not working since the December update. I have 3 charging pads (2 are identical) and a wireless charger in my car.
Since the update:
- One of the charging pads works normally while an identical one does not.
- My car's wireless charger stopped working.

The problem looks to be that the Pixel is not doing something to trigger the charging pad to start outputting the charging signal or it is not detecting it properly. If I put a different phone on the charging pad to activate it (make the LED turn blue/on) then quickly swap the phone with the Pixel, then the Pixel will pick up the charge and keep the base charging it. If I pick up the pixel and put it straight back down on the exact same spot, then nothing happens.
I assume the changes that google made to increase the wireless charging rate for the Pixel branded wireless chargers has broken what used to work in the November firmware.
submitted by The_Jinx_Effect to GooglePixel [link] [comments]


2022.01.26 06:13 fuxi_13 wen? wen

wen? wen submitted by fuxi_13 to okoidawappler [link] [comments]


2022.01.26 06:13 NatK94 Not sure if you seen before but UMVC3 can now be modded on PC leaving custom characters to be made

submitted by NatK94 to xD1x [link] [comments]


2022.01.26 06:13 PlanetMars2000 Just finished building a PC - is this configuration of the AIO correct?

what the title says. Will the tubes bend affect the lifespan of the AIO? I hear noise only a few seconds after boot up.
https://imgur.com/a/6Hu3sUk
submitted by PlanetMars2000 to buildapc [link] [comments]


2022.01.26 06:13 InverseFcB My S and A garage

My S and A garage submitted by InverseFcB to TopDrives [link] [comments]


2022.01.26 06:13 argunnn All I want a chill game

All I want a chill game submitted by argunnn to eu4 [link] [comments]


2022.01.26 06:13 ChildhoodConstant888 Beyler 5 saatlik surekli dizi bolumu bitirdim sorulari alayim

Beyler 5 saatlik surekli dizi bolumu bitirdim sorulari alayim submitted by ChildhoodConstant888 to KGBTR [link] [comments]


2022.01.26 06:13 newbcrypter The future of crypto payment is here! DEFIBAY will disrupt the and revolutionize crypto payment space. #DBAY #DEFIBAY

DefiBay #DBAY $DBAY The $DBAY token is changing the crypto payment space for the better. Get ready to enjoy the future utilities that would change the crypto world.
Find out more!
Website : www.defibay.app
TG : https://t.me/DefiBayOfficial
Twitter : https://twitter.com/DefiBayOfficial
submitted by newbcrypter to ShitCoinsCrypto [link] [comments]


2022.01.26 06:13 trcimalo guys richest man in all of western srbija

submitted by trcimalo to 2balkan4you [link] [comments]


2022.01.26 06:13 TheHandsomeServant Does the state have the right to kick construct an area anew and kick out the people living there? Don’t the civilians have rights when it comes to this?

submitted by TheHandsomeServant to NoStupidQuestions [link] [comments]


2022.01.26 06:13 poboroznyuk The woman with ethnic earrings, me, pencil, 2017

submitted by poboroznyuk to Art [link] [comments]


2022.01.26 06:13 2011Joker Converting religion

I was born into a Christian family and have grown up being a catholic. But once i clocked 21 the church and Christianity didn't make any sense to me..... I still respect it for the values i gained from it.. but i have always wanted to convert to islam.... For those who have converted ... How was it and did you get any backlash from family and friends.... And if so how can one convert into islam(process)
submitted by 2011Joker to Kenya [link] [comments]


2022.01.26 06:13 PepoK How to find sku_name for the server I decided to use?

Hello everyone.
I have very limited experience with Azure (almost 0) and with databases in general (I was just a user so far, running some queries).
I'm working with Power Automate in my job for automation projects and so far, we did not need any database for our projects. But recently I have decided to change one of the scripts to utilize database, but we need only something small.
So I was thinking about getting the cheapest MySQL database from Azure and see how it goes, and maybe improve later if necessary
The settings would be Flexible server, Burstable, Basic 1 vCore
So I have successfully deployed the database, but then I found out it's not gonna be so easy as I though. I was able to create the server, but I could not connect to the DB in any way.
I work for huge company that have lots of policies to setup which I was not aware :) We had one migration team that helped us migrate our team website to Azure so I approached them if they could help me in this. They are contractors so they were not really hyped about helping me, but showed me that the team website was deployed through some pipeline and showed me how to prepare layer in the pipeline to deploy my database with all the necessary firewall and subnets settings.
Here is the problem, most of the settings in that file is easy to fill in, but they are asking for sku_name which what I understood is basically some kind of code for the compute power you want. But nowhere in the code is the distinction between flexible server and single server. I want to keep the costs at minimum, and the price difference is kinda big between these options.
Anyone have any idea how to solve this?
I just found some general guides how to create the sku_name code, but it involves Tier_Compute_NumberOfCores and not the deployment option.
submitted by PepoK to AZURE [link] [comments]


2022.01.26 06:13 beeeans666 What breed is my cat? Oh he's a _____

submitted by beeeans666 to AskOuija [link] [comments]


2022.01.26 06:13 LawwellsDriveway Erik Sviatchenko “100%” wants to return to Celtic one day

Erik Sviatchenko “100%” wants to return to Celtic one day submitted by LawwellsDriveway to CelticFC [link] [comments]


2022.01.26 06:13 Mellosch14 Übernahme & Gehalt nach Ausbildung (Anschlussvertrag)

Hallo zusammen, ich halbe letzte Woche meine Ausbildung beendet (20.01) und wurde übernommen. Mein Anschlussvertrag läuft ab dem 21.01.22. Dementsprechend müsste ich doch (neben der Ausbildungsvergütung) für die 11 Tage im Januar direkt anteilig ein volles (bzw. mehr) Gehalt erhalten, oder?
Danke im Voraus.
submitted by Mellosch14 to arbeitsleben [link] [comments]


2022.01.26 06:13 TheSpaceRonin Does anyone know if the PVP IV calculator reflects the minimum IV floor for legendary Pokemon and others that can only be obtained with a stat floor?

To clarify, say you have a non shadow Raikou. You would only ever be able to obtain this through events that garuntee it has a minimum IV on each stat of10(? I can't remember the actual stat floor for reward Pokemon)
So, since a Raikou could never have say, an atk IV of 1 and high Def and Hp IVs, wouldn't it make sense for the pvp IV calculator to take this into account when determining the best possible IVs of a Raikou or similar Pokemon?
Meaning, even if in theory, a legendary with, say 01/12/15 IVs would be the perfect IV set for great or ultra league, shouldn't the calculator take into account that it's impossible to get a legendary with that stat range, and only consider the stat ranges possible when determining PvP performance?
I feel as though it doesn't do this, because every legendary I have has what pokegenie says is terrible stats for great or ultra league, but I know that nobody else could have one with the perfect set of IVs unless they've straight up been hacking (as far as I know, please correct me if I'm wrong) so how am I supposed to know what the best IVs for a Raikou in great league would be?
submitted by TheSpaceRonin to PokeGenie [link] [comments]


2022.01.26 06:13 Revonlieke What do you guys think of the Switch Axe in Rise?

What do you guys think of the Switch Axe in Rise? submitted by Revonlieke to MonsterHunter [link] [comments]


2022.01.26 06:13 RopeTerrible Completed my Dive Into You theme 😭💚

Completed my Dive Into You theme 😭💚 submitted by RopeTerrible to superstarsmtown [link] [comments]


http://larisa-lang.ru